Sanitary Valves

ASME BPE compliant ISO 1127 / DIN 11850 Tube Size 3A Floating Ball Valve

> Valves > SANITARY

Habonim Sanitary Ball valves are in service by the thousands for decades in leading bio-pharmaceutical, pharmaceutical, food and beverages manufacturing and processing facilities around the globe, by the leading companies of the industry. A wide range of ball valves are offered to support ASME BPE compliance, European Sanitary ISO/DIN Tubing, FDA and EU standards and specification for Biotech, Pharma, Food and Beverages. They are all fully tested and certified for fugitive-emission, Fire Safe, PED, ATEX and other required standards.

Sanitary valve catalog EN

Valves Design: Top Entry Trunnion Mounted Ball Floating Ball

ASME BPE compliant

Array ( [introduction_text] =>

Complies with the ASME BPE standard for applications in which cleanability and drainability are essential for product quality.
Patented HermetiX™ stem seal, made from FDA-approved polymer materials. The valve port diameter is identical to the tube inner diameter so that no expansion or contraction can take place inside the system, resulting in full drainage and zero traces that could cause contamination.
” To provide superior welding quality, to avoid rouging on austenitic stainless steel surfaces, and corrosion attack on welding areas. Metal parts are defined, as standard, with low ferrite and controlled sulfur”. Upon request, a forged 316L stainless steel material with ferrite content less than 1% is also available.

The COMPACT actuator is a quarter-turn rack & pinion pneumatic actuator that doubles the torque and cut by half the piston travel of standard pneumatic actuators.
The superior performance is achieved by Habonim’s patented four piston design, which generates torque around a centrally located piston, this translates into:
• Double the power for the same size actuator or Half the size for the same amount of power
• Much faster opening and closing time.
A full range of Mounting Kits is available, allowing optimized mounting and use of the COMPACT actuator for valve automation with Habonim’s valves and simple integration with valves that have a standard ISO-plate mounting interface.
Valve Automation Packages are offered based on Habonim’s standard and custom made valves and actuators, or as custom made packages with valves, actuators and top-works per customer requests.

ASME BPE fully compliant series.
3A 68-00 #3828 certefied valve series.
Valves ends per ISO 1127 and DIN EN 10357 (DIN 11850) available.
HermetiX stem sealing – fugitive emission certified for ISO 15848-1 and API 641.
Clean Fire-Safe construction – no graphite contamination to media design.
Non-graphite construction available.

) [1] => Array ( [title] => Materials: [list] =>

316L Stainless Steel as forge, cast or bar with controlled sulfur and ferrite levels for body and
end connections.
Mix of cast body and forge end connections is available as standard.
316L Stainless Steel for Ball & Stem, bolts, nuts and handle.
FDA and USP Class VI compliant polymers or elastomers only.
Hasteloy-C22 castings, AL6XN, Alloy 20, other exotic alloys – upon request.

) [2] => Array ( [title] => Sanitary & Cleaning features – available upon request: [list] =>

Cavity filler.
Self-flush body, self-flush ball for Clean-In-Place and in-line cleaning.

) [3] => Array ( [title] => Surface finish: [list] =>

All body, ball, seat retainer and end connections are polished internally.
Bar-stock made valves are externally polished.
Standard polishing level is 0.625 μ-m (25 μ-in) Ra max, Up to 0.375 μ-m (15 μ-in) Ra max level
is available.
Mechanical or electro-polishing is used.

) [4] => Array ( [title] => Valve Styles: [list] =>

3 pieces straight.
Diverters & mixing bottom or side entry.
Flush tank.
Multi-ball manifolds.
CompAct actuators tailored to sanitary systems with special painting, coating & material
selection.

Testing & acceptance criteria for 48 series – inspection according to ASME –BPE: 2016.

48

Size range

1/2”- 6” (DN15-DN150)

Pressure range:

Up to class 300

Array ( [introduction_text] =>

Comply with the ASME BPE standard for applications in which cleanability and drainability are essential for product quality.
Patented HermetiX™ stem seal, made from FDA-approved polymer materials. The valve port diameter is identical to the tube inner diameter so that no expansion or contraction can take place inside the system, resulting in full drainage and zero traces that could cause contamination.
“To provide superior welding quality, to avoid rouging on austenitic stainless steel surfaces, and corrosion attack on welding areas, Metal parts are defined, as standard, with low ferrite and controlled sulfur”. Upon request a forged 316L stainless steel material with ferrite content less than 1% is also available.

The COMPACT actuator is a quarter-turn rack & pinion pneumatic actuator that doubles the torque and cut by half the piston travel of standard pneumatic actuators.
The superior performance is achieved by Habonim’s patented four piston design, which generates torque around a centrally located piston, this translates into:
• Double the power for the same size actuator or Half the size for the same amount of power
• Much faster opening and closing time.
A full range of Mounting Kits is available, allowing optimized mounting and use of the COMPACT actuator for valve automation with Habonim’s valves and simple integration with valves that have a standard ISO-plate mounting interface.
Valve Automation Packages is offered based on Habonim’s standard and costume made valves and actuators or as costume made packages with valves, actuators and top-works per customer requests.

FDA and USP Class VI compliant polymers or elastomers are used in the series.
Controlled ferrite cast or forged bar materials are used and polished (in some series) to
avoid rouging on austenitic stainless-steel surfaces and corrosion attack on welding areas.
Electro-polished surface finishes are available upon request for some series.
EC 1935 – as an option

) [1] => Array ( [title] => Design [list] =>

Purge and drain ports are available upon request to facilitate CIP/SIP operation.
Diverter and various multiport configurations are available upon request.

) [2] => Array ( [title] => Reference standards [list] =>