ACCESSORIES

> Valves > ACCESSORIES

Habonim offers a range of Valve Accessories to allow additional Sealing, Safety measures or Operational capabilities to be added to the valve offering where applicable. All Accessories are designed, manufactured and verified for safe and long-term use.

Valves Accessories

Array ( [introduction_text] =>

The robust device locks the valve handle at open or close position and allow to add a pad lock (up to 6mm) for misuse prevention. The spring-load construction ensure handle is lock
in position at all valve installation orientations and under vibrating conditions. An accidently push / pull / turn of the handle is prevented.

Locking Device

Size range

Pressure range:

Array ( [introduction_text] =>

Lockable Handle

Size range

Pressure range:

Array ( [introduction_text] =>

A spring-loaded device that force the valve into close or open base position, by manually forcing the valve handle it can be temporary turned into the opposite position (close or open respectively).
Once handle is released the device will automatic force the valve into its base position.

device internals are open to atmosphere (no pressure is build inside)

) [1] => Array ( [title] => In-Line Assembly [list] =>

The SRH can be fitted on valves in line without shutting down the system or removing the valve from the line

) [2] => Array ( [title] => Fail to close, fail to open options [list] => ) [3] => Array ( [title] => Size range [list] =>

Standard port: ½”- 1¼” (DN15 – DN32)
Full port: ½”- 1″ (DN15 – DN25)

Spring Return Handle (SRH)

Size range

Standard port: ½"- 1¼" (DN15 - DN32) Full port: ½"- 1" (DN15 - DN25)

Pressure range:

Array ( [introduction_text] =>

A device for improved Fugitive Emission prevention from valve stem sealing. The device adds a secondary sealing layer on top of the valve integral stem sealing.

Secondary HermetiX or High temperature graphite

) [1] => Array ( [title] => Any media that might breach the valve stem seal [list] =>

is contained within the device bonnet until valve maintenance can be safely held

) [2] => Array ( [title] => The bonnet design allows a sensing device to be fitted [list] =>

between the two sealing arrangements, allow immediate breach identification or alerting

) [3] => Array ( [title] => A machined lip on the bonnet bottom plane ensures a safe fit over the valve ISO pad [list] =>

A static seal provides sealing to the atmosphere

Fugitive Emission Bonnet (FE)

Size range

1/2"-21/2" | DN15-DN65 | CLASS 300 3"-8" | DN80-DN200 | CLASS 300

Pressure range:

Array ( [introduction_text] =>

An extension device to allow a larger distance between the handle or actuator and the valve body. The extension bonnet does not seal at its upper end and is open to the atmosphere.
The valve stem seal is in use for media sealing.

• Valve and pipe lines need to be insulated
• Valve operation must be elevated from extreme temperature areas
• Direct mounting of actuator to a valve is not suitable

Caution!: In any case the vents are sealed – pressure within the FE bonnet must not exceed 50 bar!

Extended Bonnet (EXT)

Size range

Pressure range:

Array ( [introduction_text] =>

In applications that use a fail-safe actuator, the spring chambers are exposed to the surrounding environment. Every stroke generated by the force of the springs introduces air from the
surroundings into the actuator’s inner parts. In the case of corrosive and/or abrasive working environments, the springs and the interior of the spring chamber become prone to damage
that could cause the product to malfunction.
The Breather Block isolates the actuator’s internal parts from the corrosive/abrasive surroundings by allowing only dry and filtered instrument air to flow into the spring chamber during the
actuator’s spring stroke. The Breather Block’s exhaust port only allows air to flow out of the spring chamber and prevents outside air from flowing in.

air supply tubes can be connected to the inlet port with a ¼” NPT (Imperial) or M5-10/24 UNC (Metric) connector

) [3] => Array ( [title] => Aluminum anodized coating and external paint layer for extreme protection [list] => ) [4] => Array ( [title] => Optional metallic construction materials are available. [list] =>

The O-ring and membrane are made from Buna-N

) [5] => Array ( [title] => Operating limits: [list] =>

pressures up to 10 bar (150 psi) and temperature range of -20º C to +85º C (-4º F to +185º F)

Breather Block

Size range

C15 up to C100

Pressure range:

Array ( [introduction_text] =>

In a failsafe actuator compressed air inside the actuator preloads the springs. During normal operation, each time the solenoid valve is tripped the compressed air is released into the
atmosphere through the solenoid valve’s exhaust port. The patented IMPACT™ unit diverts part of this energy to the spring chamber in order to boost the torque of the actuator by at least 50%.
The IMPACT™ also functions as a Breather Block that isolates the spring chamber from the atmosphere, and as a check valve that ensures that the temporary reduction of the compressed air pressure does not trigger movement of the valve and actuator to the mid-position. The IMPACT™ is used for on/off systems only, and cannot be used for control applications.

IMPACT™ - Spring Assist

Size range

Pressure range:

PERFORMING IN DEMANDING APPLICATIONS